What is the Unit Of Inductance: SI Unit (Henry), CGS Units and Relationship between Inductance, Voltage and Current | CollegeSearch

Home  >  Articles  >  Unit of Inductance: SI Unit (Henry), CGS Units and Relationship between Inductance, Voltage, and Current

Unit of Inductance: SI Unit (Henry), CGS Units and Relationship between Inductance, Voltage, and Current

Kasturi Talukdar

Updated on 27th June, 2023 , 6 min read

SI Unit of Inductance Overview

Inductance is a fundamental concept in electrical engineering that plays a crucial role in the behavior of electrical circuits. It is a property of an electrical conductor or coil that opposes changes in current flow. Understanding the SI unit of inductance is essential for engineers and scientists working with electromagnetic devices and systems. In this article, we will delve into the details of inductance, its significance, and the SI unit used to measure it.

Similar Read: Brewster Law

What is Inductance?

Inductance refers to the ability of a conductor or coil to store energy in a magnetic field. When an electric current passes through a conductor, it generates a magnetic field around it. This magnetic field induces a voltage in the conductor, which opposes any changes in the current. Inductance is responsible for the behaviour of components like inductors, transformers, and electromagnets.

The equation,

 L = ϕ(i) / i 

Defines the inductance (L), where (i) represents the magnetic flux of current i and I denotes the current.

Similarly, when relating it to the equationε = dI/dt * L

We establish the equality between the induced voltage (ε) and the rate of change of current (dI/dt) multiplied by the inductance (L).

In terms of units, inductance (L) is expressed as volt-second per ampere (V·s/A), indicating the combination of voltage and time divided by current.

Understanding the SI Unit of Inductance

The SI unit of inductance is called the "Henry" and is represented by the symbol "H." It is named after Joseph Henry, an American scientist who made significant contributions to the field of electromagnetism. The Henry is defined as the inductance of a circuit when an electric current of one ampere produces a magnetic flux change rate of one Weber per second.

  1. The Henry (H) is the standard unit of inductance in the International System of Units (SI).
  2. When an electric circuit has an inductance of 1 Henry, it means that a change in current at a rate of one ampere per second will induce a voltage of 1 volt in the circuit.
  3. The unit Henry is derived from the combination of seven base SI units.
  4. In addition to the SI unit Henry, the MKS (meter-kilogram-second) unit of inductance is expressed as kilogram meter squared per second squared per ampere squared (kg·m²/s²·A²).

1 Henry = 1 Kg m² s²A²

Relationship between Inductance, Voltage, and Current

Inductance is closely related to voltage and current in electrical circuits. According to Faraday's law of electromagnetic induction, the voltage induced across an inductor is directly proportional to the rate of change of current passing through it. Mathematically, this relationship is expressed as:

V = L * (dI/dt)

Where:

  • V represents the induced voltage (in volts)
  • L denotes the inductance (in Henries)
  • (dI/dt) represents the rate of change of current (in amperes per second)

Other Inductance Units

Inductance, the property of a circuit or component that opposes changes in current, is measured in various units apart from the primary SI unit, the Henry (H). While the Henry is the preferred unit, alternative units are commonly used to represent smaller or larger inductance values. Here are some other commonly used units of inductance:

  1. Millihenry (mH): The millihenry is equal to one-thousandth of a henry. It often expresses inductance values in smaller electronic components or circuits. 1 H = 1000 mH.
  2. Microhenry (µH): The microhenry is equal to one-millionth of a henry. It is frequently used to measure the inductance of small inductors and integrated circuits. 1 H = 1,000,000 µH.
  3. Nanohenry (nH): The nanohenry is equal to one billionth of a henry. It is commonly employed in high-frequency applications and miniaturized electronic devices. 1 H = 1,000,000,000 nH.
  4. Picohenry (pH): The picohenry is equal to one trillionth of a henry. It is utilized in extremely sensitive applications, such as RF (radio frequency) and microwave circuits. 1 H = 1,000,000,000,000 pH.

These units allow for a convenient representation of inductance values across different scales, accommodating a wide range of applications and components. When working with inductors, it is essential to ensure consistency in the chosen unit and perform appropriate conversions when necessary.

Table for Conversion Factors

Unit

Symbol

Conversion

Henry (H)

H

1 H = 1 H

Millihenry

mH

1 H = 1000 mH

Microhenry

µH

1 H = 1,000,000 µH

Nanohenry

nH

1 H = 1,000,000,000 nH

Picohenry

pH

1 H = 1,000,000,000,000 pH

Conversion Factors for Inductance

In addition to the SI unit of inductance (Henry), there are other commonly used units in practical scenarios. Here are some conversion factors:

  • 1 millihenry (mH) = 0.001 henry
  • 1 microhenry (µH) = 0.000001 henry
  • 1 nanohenry (nH) = 0.000000001 henry

Also Read About:

SI Unit Inductance in Practical Applications

Inductance finds extensive application in various electrical devices and systems. Some key applications include:

  1. Inductors: These are passive electronic components designed to introduce inductance into a circuit. Inductors are widely used in filtering, energy storage, and oscillators.
  2. Transformers: Transformers utilize inductance to transfer electrical energy between circuits. They can step-up or step-down voltage levels based on the primary to secondary winding turn ratio.
  3. Induction Motors: Induction motors rely on the principle of inductance for their operation. The rotating magnetic field induced by alternating current in the stator windings interacts with the conductors in the rotor, generating motion.

Factors Affecting Inductance

Inductance, a fundamental property of electrical circuits, is influenced by several factors that affect its magnitude and behavior. Understanding these factors is crucial for designing and analyzing circuits involving inductors. Here are the key factors that affect inductance:

  1. Number of Turns (N): The number of turns in an inductor coil significantly affects its inductance. Increasing the number of turns increases the magnetic field strength and, subsequently, the inductance. Conversely, reducing the number of turns decreases the inductance.
  2. Cross-Sectional Area (A):The cross-sectional area of the inductor core also plays a role in determining inductance. A larger cross-sectional area allows for more magnetic flux to pass through, resulting in higher inductance. Similarly, a smaller cross-sectional area leads to lower inductance.
  3. Length of the Coil (l):The length of the coil, particularly the length of the magnetic path within the inductor, impacts inductance. A longer coil length increases the overall resistance to the magnetic flux, reducing the inductance. Conversely, a shorter coil length enhances inductance.
  4. Permeability of the Core Material (µ):The permeability of the inductor core material affects inductance. Materials with high permeability, such as iron or ferrite, allow for a more efficient concentration of magnetic flux and, therefore, result in higher inductance. Conversely, materials with low permeability exhibit lower inductance.
  5. Presence of a Ferromagnetic Core:Inserting a ferromagnetic core within an inductor coil significantly increases inductance. The core enhances the magnetic flux concentration and improves energy storage efficiency in the magnetic field.
  6. Frequency of Current:Inductance can vary with the frequency of the alternating current passing through the inductor. At higher frequencies, inductive reactance (Xl) increases, resulting in higher inductance. At low frequencies, inductance remains relatively constant.
  7. Mutual Inductance:When two or more inductors are placed in proximity to each other, their magnetic fields can interact, resulting in mutual inductance. The presence of mutual inductance between inductors affects the effective inductance of the system.
  8. Saturation:In some cases, when the current through the inductor becomes too high, the magnetic core may saturate. Saturation limits the inductance value, causing it to deviate from the expected behavior.

SI Unit Inductance: Things to Remember

  1. An inductor is an inactive component utilized for the storage or retention of energy.
  2. The SI unit for measuring inductance is Henry (H).
  3. The inductance of an inductor is influenced by factors such as the number of turns in the coil, the material of the coil, the length of the coil, and the area of the coil.
  4. In the MKS (meter-kilogram-second) system, the unit of inductance is expressed as kilogram meter squared per second squared per ampere squared (kg·m²/s²·A²).
  5. The formula for inductance can be represented as L = ϕ(i) / i, where L denotes inductance and (i) represents the magnetic flux associated with current i.

Similar Articles

JoSAA Counselling 2023

By - Avantika Bhardwaj 2023-07-13 13:34:07 , 19 min read
Read More
Check Eligibility   Free 1:1 Counselling